1. Before applying the new machine, the top cover should be opened to check the distance between the moving blade and the fixed blade. The optimal gap between the moving blade and the fixed blade is 0.2-0.3mm (There is an adjustment bolt at the cutting point).
2. Check if the bolts fixing the bottom of the screen mesh are loose, then lower the top cover and tighten the bolts.
3. The outer section of the main wheel and the power wheel must be on the same plane. After the belt is fastened, the tightness adjustment should be appropriate and not too loose or too tight.
4. Before starting, you can first flip the belt pulley by hand, and there should be no friction or impact during the flipping process. Only after it is normal can you start and check the working direction to produce normally. Therefore, it can be seen that the adjustment before the equipment is crucial. Customers who use biomass crushers must not be careless.